BerryBreeze

Oxygenate your Fridge!


Berry_Fridge.jpg

Benefits of BerryBreeze™


Save_planet.jpg
No-filters.jpg
Reduce_hunger.jpg
Healthy_lifestyle.jpg

Introduction Video


video_01.jpg

Order Online

payfast1.png

Share Our Page

Follow us on Instagram


instagram.png
Dr Haffejie on Instagram

Order your BerryBreeze™ Now!


payfast2.jpg

Download a detailed description of the Science Behind the BerryBreeze™ in PDF format.

The BerryBreeze™ is a lightweight 9.1 oz device (5w x 2.5d x 5.2h inches), battery-operated oxygen generator, with no filters to clean, and no maintenance required. While generating oxygen, the LED on the front of the BerryBreeze™ glows green in color continuously. When in standby mode, the LED light blinks every 3.5 seconds. When the batteries are low the LED light turns red, suggesting it is time to replace the batteries. Battery ilfe is estimated at approximately 5 to 6 months, before requiring replacement.

The BerryBreeze™ uses a microprocessor to control its automatic operating system. After your BerryBreeze™ is activated, it will generate oxygen continuously for the first 60-minutes of operation; then automatically switch to standby mode for 170-minutes. At the conclusion of the first standby mode period, the BerryBreeze™ will automatically activate itself to generate oxygen for 10-minutes. Then, it will repeat, again and again, a cycle of 230-minutes in standby mode and 10-minutes in generation mode until the batteries require replacement and you repeat the initial activation process by reassembling the upper half of the BerryBreeze™ with the lower half (battery compartment).

Operating your BerryBreeze™

Step 1 Open the box and remove your BerryBreeze™ from the packaging material.

Step 2 Press both tabs on the sides of the BerryBreeze™ at the same time to separate the top half of the unit from the lower half (battery compartment). Insert four (4) “D” size batteries properly into the lower battery compartment of the BerryBreeze™ (Batteries not included). Firmly reattach the two (2) halves of the BerryBreeze™.

Step 3 Once the two (2) halves are securely attached, the light on the front of the BerryBreeze™ will glow solid green for about 1 hour, indicating the BerryBreeze™ is activated. Following this mode, the light will blink green every 3.5 seconds to indicate the BerryBreeze™ is in the standby mode. Your BerryBreeze™ will automatically cycle between standby mode (blinking green) and active mode (solid green).

Step 4 Place the BerryBreeze™ on the top shelf inside your refrigerator. Do not remove the BerryBreeze™ from your refrigerator during operation, except to replace the four (4) “D” size batteries about every 5 to 6 months (depending on quality and freshness). Batteries are not included.


All Rights Reserved BerryBreeze™ SA